{"title":"Sail Cars","description":"\u003cp\u003eSeldén’s sail cars ensure smooth hoisting, reefing, and lowering of your mainsail. Designed for use with Seldén mast tracks and full-batten systems, these low-friction cars improve sail handling under load. Ideal for cruisers and racers seeking durability, reliability, and precise control at the mast. \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\" target=\"_blank\"\u003eLearn more about Seldén Sailmaking Hardware\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"mds-68-intermediate-car-in-composite-for-selden-mast-sections-c211-c227-c245-c264-c285-c304","title":"MDS 68 - Intermediate car in composite - for Seldén mast sections C211, C227, C245, C264, C285, C304","description":"\u003cp\u003eA six wheel, 68 mm long intermediate car in composite, with shaft and bushing for webbing applications. \u003c\/p\u003e\u003cp\u003eThis is the car used between and below the full-batten cars.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 68 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 68 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøD\u003c\/b\u003e: 10 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 1.20 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.60 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 120.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C211,C227,C245,C264,C285,C304 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635067056461,"sku":"511-701-02","price":377.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_50173335-fc07-4af1-8bfb-d0c65f899c1d.jpg?v=1790928418"},{"product_id":"mds-68-composite-full-batten-car-for-selden-mast-sections-c211-c227-c245-c264-c285-and-c304","title":"MDS 68 - composite Full-batten car - for Seldén mast sections C211, C227, C245, C264, C285 and C304","description":"\u003cp\u003eA six wheel, 68 mm long full-batten car in composite with M10 stud.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 68 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 68 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 33 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eThread\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 1.20 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.60 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 120.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C211,C227,C245,C264,C285,C304 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635067810125,"sku":"511-701-03","price":503.75,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_7ceb2122-b2c3-4c12-bd98-47871559253b.jpg?v=1790928418"},{"product_id":"mds-45-intermediate-car-for-selden-mast-sections-c156-c175-c193-c211-c227-c245-c264-c285-and-c304","title":"MDS 45 - Intermediate car - for Seldén mast sections C156, C175,  C193, C211,  C227, C245, C264, C285 and C304","description":"\u003cp\u003eA four wheel, 45 mm long intermediate car in composite, with shaft and bushing for webbing applications. \u003c\/p\u003e\u003cp\u003eThis is the car used between and below the full-batten cars.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 45 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 45 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøD\u003c\/b\u003e: 10 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 17 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: .80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 70.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C156,C175,C193,C211,C227,C245,C264,C285,C304 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635067973965,"sku":"511-702-02","price":312.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_ed1e8fa7-9cbf-4105-a365-9bb21561be83.jpg?v=1790928415"},{"product_id":"mds-45-full-batten-car-for-selden-mast-sections-c156-c175-and-c193","title":"MDS 45 - Full-batten car - for Seldén mast sections C156, C175 and C193","description":"\u003cp\u003eA four wheel, 45 mm long full-batten car in composite with M10 stud\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 45 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 45 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 41 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 33 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 17 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eThread\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: .80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 70.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C156,C175,C193 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635070169421,"sku":"511-702-03","price":457.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_335726c5-aad7-42dd-8254-92f8381c74b0.jpg?v=1790928413"},{"product_id":"mds-68-intermediate-car-in-aluminium-for-selden-mast-sections-c211-c227-c245-c264-c285-c304","title":"MDS 68 - Intermediate car in aluminium - for Seldén mast sections C211, C227, C245, C264, C285, C304","description":"\u003cp\u003eA six wheel, 68 mm long intermediate car in aluminium, with shaft and bushing for webbing applications. \u003c\/p\u003e\u003cp\u003eThis is the car used between and below the full-batten cars.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 68 ALU \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 68 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøD\u003c\/b\u003e: 10 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 6.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 335.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C211,C227,C245,C264,C285,C304 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635070497101,"sku":"511-717-02","price":3006.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_b261431f-bc72-4e43-825e-6387b8475154.jpg?v=1790928420"},{"product_id":"mds-68-aluminium-full-batten-car-for-selden-mast-sections-c211-c227-c245-c264-c285-and-c304","title":"MDS 68 - aluminium Full-batten car - for Seldén mast sections C211, C227, C245, C264, C285 and C304","description":"\u003cp\u003eA six wheel, 68 mm long full-batten car in aluminium with M10 stud.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 68 ALU \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 68 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 33 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eThread\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 6.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 335.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C211,C227,C245,C264,C285,C304 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635070562637,"sku":"511-717-03","price":3101.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_582a6b47-d28b-47ad-99c9-774c60bbea1a.jpg?v=1790928698"},{"product_id":"iws-45-intermediate-car-for-selden-mast-sections-c137-c153-c180","title":"IWS 45 intermediate car - for Seldén mast sections C137, C153, C180","description":"\u003cp\u003eThis composite car is used as an intermediate sail car between and below battens. A bushing on the shaft prevents chafe on the webbing.\u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 45 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 46 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøD\u003c\/b\u003e: 10 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 120.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C137,C153,C180 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635072430413,"sku":"511-729-02","price":322.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_74ae4f44-3367-476c-bd8b-b9d272443dfe.jpg?v=1790926608"},{"product_id":"iws-45-fullbatten-car-with-m10-stud-for-selden-mast-sections-c137-c153-c180","title":"IWS 45 fullbatten car with M10 stud - for Seldén mast sections C137, C153, C180","description":"\u003cp\u003eThis composite fullbatten car features a M10 threaded stud and can be used with corresponding batten receptacles. \u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 45 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 46 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 33 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eTHREAD\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 1.20 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 120.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C137,C153,C180 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635072495949,"sku":"511-729-03","price":436.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_3f1ab908-e06d-4c95-94d2-95bc8e7440e7.jpg?v=1790926601"},{"product_id":"iws-45-headboard-car-for-selden-mast-sections-c137-c153-c180","title":"IWS 45 Headboard car for Seldén mast sections C137, C153, C180","description":"\u003cp\u003eThis headboard car assembly consists of two IWS 45 cars and a composite headboard toggle with a Drop-nose pin for easy connection with the headboard of the sail. \u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 45 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 120 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 74 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 46 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøPIN\u003c\/b\u003e: 12 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eW\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.40 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 4.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 70.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C137,C153,C180 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635072561485,"sku":"511-729-04","price":1477.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_9501d278-53ec-4f44-9231-30d1248700b4.jpg?v=1790925989"},{"product_id":"mds-80-intermediate-car-in-composite-for-selden-mast-sections-c321-and-c365","title":"MDS 80 - Intermediate car in composite - for Seldén mast sections C321 and C365","description":"\u003cp\u003eA six wheel, 80 mm long intermediate car in composite with shaft for webbing applications. \u003c\/p\u003e\u003cp\u003eThis is the car used between and below the full-batten cars.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 80 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøD\u003c\/b\u003e: 8 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 23 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 1.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 7.60 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 200.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C321,C365 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635072627021,"sku":"511-730-02","price":1227.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_de521fa1-7531-4e17-a188-cd2db472893c.jpg?v=1790928422"},{"product_id":"mds-80-full-batten-car-in-composite-with-m10-stud-for-selden-mast-sections-c321-and-c365","title":"MDS 80 - Full-batten car in composite with M10 stud - for Seldén mast sections C321 and C365","description":"\u003cp\u003eA six wheel, 80 mm long full-batten car in composite with M10 stud\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 80 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 70 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 29 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 23 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eThread\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 1.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 7.60 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 200.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C321,C365 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635074167117,"sku":"511-730-03","price":2001.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_7afaf847-622e-47f7-bb72-bafabcdfe7af.jpg?v=1790928427"},{"product_id":"mds-80-full-batten-car-in-composite-and-m12-stud-for-selden-mast-sections-c321-and-c365","title":"MDS 80 - Full-batten car in composite and M12 stud - for Seldén mast sections C321 and C365","description":"\u003cp\u003eA six wheel, 80 mm long full-batten car in composite with M12 stud\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\" target=\"support\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 80 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 70 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 29 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 23 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eThread\u003c\/b\u003e: M12 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 1.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 7.60 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 200.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C321,C365 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635074298189,"sku":"511-730-09","price":2001.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_9c1e923e-037e-4a2a-81bf-0d70575746cc.jpg?v=1790928430"},{"product_id":"mds-80-heavy-duty-intermediate-car-in-aluminium-for-selden-mast-sections-c321-and-c365","title":"MDS 80 - Heavy Duty Intermediate car in aluminium - for Seldén mast sections C321 and C365","description":"\u003cp\u003eA six wheel, 80 mm long intermediate car in aluminium with shaft for webbing applications. \u003c\/p\u003e\u003cp\u003eThis is the car used between and below the full-batten cars.\u003c\/p\u003e\u003cp\u003eDimensioned for a righting moment at 30° heel of maximum 550 kNm on a masthead rigged monohull yacht and 450 kNm on a fractional rig.\u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 80 ALU \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøD\u003c\/b\u003e: 8 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 23 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 9.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 450.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C321,C365 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635074363725,"sku":"511-731-02","price":4136.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_d540b863-92c3-40dd-9b74-08134406ac19.png?v=1790928429"},{"product_id":"mds-80-heavy-duty-full-batten-car-in-aluminium-with-m10-stud-for-selden-mast-sections-c321-and-c365","title":"MDS 80 - Heavy Duty Full-batten car in aluminium with M10 stud - for Seldén mast sections C321 and C365","description":"\u003cp\u003eA six wheel, 80 mm long full-batten car in aluminium with M10 stud\u003c\/p\u003e\u003cp\u003eDimensioned for a righting moment at 30° heel of maximum 550 kNm on a masthead rigged monohull yacht and 450 kNm on a fractional rig.\u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 80 ALU \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 70 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 29 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 23 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eThread\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 9.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 450.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C321,C365 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635074429261,"sku":"511-731-03","price":4687.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_52250c77-a7ad-4c6e-b7da-8edaa70a7228.jpg?v=1790928432"},{"product_id":"mds-80-heavy-duty-full-batten-car-in-aluminium-with-m12-stud-for-selden-mast-sections-c321-and-c365","title":"MDS 80 - Heavy Duty Full-batten car in aluminium with M12 stud - for Seldén mast sections C321 and C365","description":"\u003cp\u003eA six wheel, 80 mm long full-batten car in aluminium with M12 stud\u003c\/p\u003e\u003cp\u003eDimensioned for a righting moment at 30° heel of maximum 550 kNm on a masthead rigged monohull yacht and 450 kNm on a fractional rig.\u003c\/p\u003e\u003cp\u003eThe MDS full-batten concept  -  Full support in all directions\u003c\/p\u003e\u003cp\u003eAs the name implies, Seldén’s MDS (Multi-Directional Support) cars are supported in all directions, making sail handling simpler.\u003c\/p\u003e\u003cp\u003eA full batten always creates a side load on the cars, particularly when you release the halyard for taking a reef. Each MDS car has side-load absorbing wheels that run against the guiding flanges in the luff groove. The interaction between the mast section and the MDS car deals with longitudinal loads, as well as side loads. This is the essence of the MDS concept. Since the cars need no external track, there is also less weight aloft.\u003c\/p\u003e\u003cp\u003eThe MDS cars are easy to keep clean and are easy to install or remove from the luff groove. \u003c\/p\u003e\u003cp\u003eThe MDS system is a suitable complement to the Seldén Single Line Reef boom. With such a combination on board, you have a simple and easily manoeuvred system for handling the mainsail in all weathers.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eLearn more about our Sail hardware from Seldén's Sailmakers Guide\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\"\u003ehttps:\/\/support.seldenmast.com\/files\/1731490672\/595-542-E.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: MDS 80 ALU \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 70 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 29 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 23 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eThread\u003c\/b\u003e: M12 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 9.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 450.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C321,C365 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635075477837,"sku":"511-731-09","price":4687.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_ff82cefe-8522-46cc-8e66-d372a572f6f6.jpg?v=1790928693"},{"product_id":"ows-sail-car-for-selden-kemp-e-and-d-sections","title":"OWS Sail car for Seldén\/Kemp E- and D-sections","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed for earlier models of Seldén and Kemp sections (E-sections and D-sections used 1977-2002). The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003eThis car will also fit a great number of mast sections from John Mast, Soromap, Sparcraft and Z-Spars. \u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eTo acheive maximum strength, the OWS slider should be attached to the main sail using a webbing strap. All sliders for webbing can be used for headboard attachments and as intermediate sliders.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 55 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eD\u003c\/b\u003e: 8 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 131.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 5.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 5.80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 11.20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 4.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 11.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635075543373,"sku":"511-740-01","price":240.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_109170ab-e3f7-410a-86b9-ea6618840392.jpg?v=1790929022"},{"product_id":"ows-sail-car-ha-89-a-007","title":"OWS Sail car, HA 89\/A 007","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to sail slide HA 89 from Holt Allen and A 007 from Bainbridge. The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eTo acheive maximum strength, the OWS slider should be attached to the main sail using a webbing strap. All sliders for webbing can be used for headboard attachments and as intermediate sliders.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 55 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eD\u003c\/b\u003e: 8 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 131.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 10.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 2.90 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 6.20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 6.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 14.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635075641677,"sku":"511-741-01","price":240.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_4318f57a-333f-48b9-a5bc-d40a13e8607b.jpg?v=1790929026"},{"product_id":"ows-sail-car-ha-90-a-008-briand-pettersson","title":"OWS Sail car, HA 90\/A 008, Briand\/Pettersson","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to sail slide HA 90 from Holt Allen and A 008 from Bainbridge. The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003e511-742-01 will fit mast sections of the following brands\/models:\u003c\/p\u003e\u003cp\u003eBriand\/Pettersson 180x130 mm MkII (Maxi 95 from hull #250)\u003cbr\u003eBriand\/Pettersson 125x100 mm (Maxi 77)\u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eTo acheive maximum strength, the OWS slider should be attached to the main sail using a webbing strap. All sliders for webbing can be used for headboard attachments and as intermediate sliders.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 55 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eD\u003c\/b\u003e: 8 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 131.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 10.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 2.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 6.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 6.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 16.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635075707213,"sku":"511-742-01","price":240.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_c2113b54-9bca-4419-bc99-eebbcbea169e.jpg?v=1790929029"},{"product_id":"ows-sail-car-ha-91-a-009-isomat-briand-sparcraft-z-spar","title":"OWS Sail car, HA 91\/A 009, Isomat, Briand, Sparcraft, Z-Spar","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to sail slide HA 91 from Holt Allen and A 009 from Bainbridge. The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003e511-743-01 will fit mast sections of the following brands\/models:\u003c\/p\u003e\u003cp\u003eIsomat NG70\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eBriand\/Pettersson 160x120 mm (Maxi 87)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSparcraft: NG60; NG70; NG80; NG86; F580; F740; F1060; F1395; S1630;\u003cbr\u003eS2100; F2390; F3360; F4600\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eZ-Spars: Z902; Z1001; Z1250; Z1400\u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eTo acheive maximum strength, the OWS slider should be attached to the main sail using a webbing strap. All sliders for webbing can be used for headboard attachments and as intermediate sliders.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 55 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eD\u003c\/b\u003e: 8 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 131.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 12.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 5.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 9.80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 10.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 20.70 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635077542221,"sku":"511-743-01","price":240.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_c5f7e946-8757-4412-9bdd-2a72f075676f.jpg?v=1790929031"},{"product_id":"ows-sail-car-selden-keelboat-sections-sparcraft-z-spars","title":"OWS Sail car, Seldén keelboat sections, Sparcraft, Z-Spars","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to Seldén keel boat sections and some Sparcraft- and Z-spars sections . The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003e511-744-01 will fit:\u003c\/p\u003e\u003cp\u003eSeldén: C106; C116; C126; C139\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSparcraft: F35; F50; F67; F78; F101; S137; S180; S260; IMS80; IMS256\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eZ-Spars: Z170; Z190; Z230; Z265; Z501\u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eTo acheive maximum strength, the OWS slider should be attached to the main sail using a webbing strap. All sliders for webbing can be used for headboard attachments and as intermediate sliders.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 57 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eD\u003c\/b\u003e: 8 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 131.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 5.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 4.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 9.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 4.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 11.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C106,C116,C126,C139 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635077869901,"sku":"511-744-01","price":240.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_bbc7ad19-7db3-4654-95a5-d41a42202fb9.jpg?v=1790929033"},{"product_id":"ows-batten-car-for-selden-kemp-e-and-d-sections-m10-stud","title":"OWS Batten car for Seldén\/Kemp E- and D-sections, M10 stud","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed for earlier models of Seldén and Kemp sections (E-sections and D-sections used 1977-2002). The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003eThis car will also fit a great number of mast sections from John Mast, Soromap, Sparcraft and Z-Spars. \u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eThe M10 stud fits any batten receptacle with M10 thread.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 67 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 211.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 5.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 5.80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 11.20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 4.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 11.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635077968205,"sku":"511-750-03","price":611.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_83b718ca-68dd-4a8f-aa06-6071a7c698e6.jpg?v=1790929024"},{"product_id":"ows-batten-car-with-m10-stud-ha-89-a-007","title":"OWS Batten car with M10 stud, HA 89\/A 007","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to sail slide HA 89 from Holt Allen and A 007 from Bainbridge. The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eThe M10 stud fits any batten receptacle with M10 thread.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 67 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 211.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 10.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 2.90 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 6.20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 6.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 14.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635078918477,"sku":"511-751-03","price":611.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_52d92e75-9ce7-405d-95cd-cda57d12c980.jpg?v=1790929037"},{"product_id":"ows-batten-car-with-m10-stud-ha-90-a-008-briand-pettersson","title":"OWS Batten car with M10 stud, HA 90\/A 008, Briand\/Pettersson","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to sail slide HA 90 from Holt Allen and A 008 from Bainbridge. The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003e511-752-01 will fit mast sections of the following brands\/models:\u003c\/p\u003e\u003cp\u003eBriand\/Pettersson 180x130 mm MkII (Maxi 95 from hull #250)\u003cbr\u003eBriand\/Pettersson 125x100 mm (Maxi 77)\u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eThe M10 stud fits any batten receptacle with M10 thread.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 67 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 211.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 10.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 2.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 6.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 6.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 16.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635078984013,"sku":"511-752-03","price":611.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_ede03ee6-1902-4c34-9ac4-f4742f9c96f9.jpg?v=1790929038"},{"product_id":"ows-batten-car-with-m10-stud-ha-91-a-009-isomat-briand-sparcraft-z-spar","title":"OWS Batten car with M10 stud, HA 91\/A 009, Isomat, Briand, Sparcraft, Z-Spar","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to sail slide HA 91 from Holt Allen and A 009 from Bainbridge. The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003e511-753-01 will fit mast sections of the following brands\/models:\u003c\/p\u003e\u003cp\u003eIsomat NG70\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eBriand\/Pettersson 160x120 mm (Maxi 87)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSparcraft: NG60; NG70; NG80; NG86; F580; F740; F1060; F1395; S1630;\u003cbr\u003eS2100; F2390; F3360; F4600\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eZ-Spars: Z902; Z1001; Z1250; Z1400\u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eThe M10 stud fits any batten receptacle with M10 thread.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 67 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 16 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 211.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 12.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 5.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 9.80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 9.80 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 20.70 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635080589645,"sku":"511-753-03","price":611.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_e6c145ff-424f-493f-a0bf-df903f790eb3.jpg?v=1790929041"},{"product_id":"ows-batten-car-with-m10-stud-selden-keelboat-sections-sparcraft-z-spars","title":"OWS Batten car with M10 stud, Seldén keelboat sections, Sparcraft, Z-Spars","description":"\u003cp\u003eOWS (Outer Wheel slider) is an excellent upgrade from traditional sail slides to reduce friction when hoisting and dousing the main sail.\u003cbr\u003eThe depth and the shape of the slug is designed to correspond to Seldén keel boat sections and some Sparcraft- and Z-spars sections . The four wheels roll on the aft side of the mast section while the slug slides inside the luff groove. \u003c\/p\u003e\u003cp\u003e511-754-01 will fit:\u003c\/p\u003e\u003cp\u003eSeldén: C106; C116; C126; C139\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSparcraft: F35; F50; F67; F78; F101; S137; S180; S260; IMS80; IMS256\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eZ-Spars: Z170; Z190; Z230; Z265; Z501\u003c\/p\u003e\u003cp\u003eFor all technical information - \u003ca target=\"support\" href=\"https:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\"\u003ehttps:\/\/support.seldenmast.com\/en\/products\/sail_hardware\/ows_sliders.html\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eThe M10 stud fits any batten receptacle with M10 thread.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eH\u003c\/b\u003e: 69 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 42 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 18 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.50 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 211.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eFitsLuffGroove\u003c\/b\u003e: 5.50 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eZ\u003c\/b\u003e: 4.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eX\u003c\/b\u003e: 9.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eT\u003c\/b\u003e: 9.40 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eY\u003c\/b\u003e: 11.00 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C106,C116,C126,C139 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635080655181,"sku":"511-754-03","price":611.25,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_ac6ffa5d-9253-4695-aa16-dcaf8dbe1fc0.jpg?v=1790929044"},{"product_id":"iws-68-intermediate-car-for-selden-mast-sections-c192-c208-c225-c242","title":"IWS 68 intermediate car for Seldén mast sections C192, C208, C225, C242","description":"\u003cp\u003eThis composite car is used as an intermediate sail car between and below battens. A bushing on the shaft prevents chafe on the webbing.\u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 68 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 68 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøD\u003c\/b\u003e: 10 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eE\u003c\/b\u003e: 20 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 17 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 3.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.60 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 215.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C192,C208,C225,C242,C261,C280 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635080786253,"sku":"511-760-02","price":420.0,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_97044b66-c0a2-4d79-81d6-25ba75b359a9.jpg?v=1790926611"},{"product_id":"iws-68-fullbatten-car-for-selden-mast-sections-c192-c208-c225-c242-c261-c280","title":"IWS 68 Fullbatten car for Seldén mast sections C192, C208, C225, C242, C261, C280","description":"\u003cp\u003eThis composite fullbatten car features a M10 threaded stud and can be used with corresponding batten receptacles. \u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 68 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 68 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 41 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 33 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 17 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eTHREAD\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 3.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.60 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 215.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C192,C208,C225,C242,C261,C280 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635081736525,"sku":"511-760-03","price":583.75,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_7a3a8484-b2dc-4590-bbbb-1c3c31b35573.jpg?v=1790926606"},{"product_id":"iws-68-headboard-car-for-selden-mast-sections-c192-c208-c225-c242-c261-c280","title":"IWS 68 Headboard car for Seldén mast sections C192, C208, C225, C242, C261, C280","description":"\u003cp\u003eThis headboard car assembly consists of two IWS 68 cars and a composite headboard toggle with a Drop-nose pin for easy connection with the headboard of the sail. It is designed for mast sections C192, C208, C225, C242, C261, C280.\u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 68 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 142 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 76 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 46 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøPIN\u003c\/b\u003e: 12 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eW\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 4.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 4.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 70.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C192,C208,C225,C242,C261,C280 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635081965901,"sku":"511-760-04","price":1837.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_f60c17b2-0097-4a4c-bc99-e314fbb62b61.jpg?v=1790931393"},{"product_id":"iws-68-headboard-car-for-selden-mast-sections-c242-c261-c280","title":"IWS 68 Headboard car for Seldén mast sections C242, C261, C280","description":"\u003cp\u003eThis headboard car assembly consists of three IWS 68 cars and a stainless headboard toggle with a Drop-nose pin for easy connection with the headboard of the sail. It is designed for mast sections C242, C261, C280.\u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 68  \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 224 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 76 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 51 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøPIN\u003c\/b\u003e: 12 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eW\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 9.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 10.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 215.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C242,C261,C280 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635082981709,"sku":"511-760-06","price":5717.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_dbbf3f95-dd98-4b24-a267-bd3b8c26d611.jpg?v=1790925996"},{"product_id":"iws-45hd-fullbatten-car-for-selden-mast-sections-c192-c208-c225-c242-c261-c280","title":"IWS 45HD Fullbatten car for Seldén mast sections C192, C208, C225, C242, C261, C280","description":"\u003cp\u003eThis composite fullbatten car features a M10 threaded stud and can be used with corresponding batten receptacles. \u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 45HD \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 45 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 41 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 33 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eB\u003c\/b\u003e: 17 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eTHREAD\u003c\/b\u003e: M10 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 1.20 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 3.00 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 120.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C192,C208,C225,C242,C261,C280 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635083047245,"sku":"511-773-03","price":563.75,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_4cbe27a8-5aa4-47f9-b80b-8b50205ce7a7.jpg?v=1790926604"},{"product_id":"iws-45hd-headboard-car-for-selden-mast-sections-c192-c208-c225-c242-c261-c280","title":"IWS 45HD Headboard car for Seldén mast sections C192, C208, C225, C242, C261, C280","description":"\u003cp\u003eThis headboard car assembly consists of two IWS 45 cars and a composite headboard toggle and a Drop-nose pin for easy connection with the headboard of the sail. It is designed for mast sections C192, C208, C225, C242, C261, C280.\u003c\/p\u003e\u003cp\u003eThe IWS car simplifies hoisting, reefing and dousing and is used for Seldén’s newest C-sections. The side load created by the full-batten is taken up by the wheels as the slider tilts to the side and a buffer bearing centers the slider in the groove. The mast groove and the car makes for a perfect match handling loads from all direction without any extra hardware fitted to the mast.\u003c\/p\u003e\u003cp\u003eLearn more:\u003c\/p\u003e\u003cp\u003e\u003ca target=\"support\" href=\"https:\/\/www.seldenmast.com\/products\/sail-hardware\/\"\u003ehttps:\/\/www.seldenmast.com\/products\/sail-hardware\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eModel\u003c\/b\u003e: IWS 45 HD \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eH\u003c\/b\u003e: 119 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eA\u003c\/b\u003e: 76 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eL\u003c\/b\u003e: 46 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eøPIN\u003c\/b\u003e: 12 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eW\u003c\/b\u003e: 21 \u003cem\u003emm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Latitud\u003c\/b\u003e: 2.40 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eSWL+Longitud\u003c\/b\u003e: 4.80 \u003cem\u003ekN\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eRM\u003c\/b\u003e: 70.00 \u003cem\u003ekNm\u003c\/em\u003e\u003cbr\u003e\u003cb\u003eMast\u003c\/b\u003e: C192,C208,C225,C242,C261,C280 \u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Selden Mast AB","offers":[{"title":"Default Title","offer_id":52635083080013,"sku":"511-773-04","price":1772.5,"currency_code":"SEK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/5701\/8445\/files\/index_f6266ea3-b721-4f95-b065-fad83ed6d4b7.jpg?v=1790925991"}],"url":"https:\/\/shop.seldenmast.com\/collections\/sail-hardware-sail-car.oembed","provider":"Seldén Yacht Store SE","version":"1.0","type":"link"}